Original file
BMW 5 Serie - Sedan Bosch MEVD17.2.H #C1#DST#MEVD17.2.H-N63TUE-B44-O1-F10-ULEV2-AG-_LL-RL-RWD / 1037533755
An original (stock) flash read of the Bosch MEVD17.2.H control unit, fitted in BMW 5 Serie - Sedan, hardware number #C1#DST#MEVD17.2.H-N63TUE-B44-O1-F10-ULEV2-AG-_LL-RL-RWD and software number 1037533755, 4,160.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- BMW 5 Serie - SedanN63B44 · 450.0PS / 331.0kW
- Control unit
- Bosch MEVD17.2.H
- Read type
- Full read (boot area included)
- File
- 4,160.00 KB · Flash
- Hardware number
- #C1#DST#MEVD17.2.H-N63TUE-B44-O1-F10-ULEV2-AG-_LL-RL-RWD
- Software number
- 1037533755
- Bosch part / software
- 1037540064
- Software / calibration
- 8AC98E0B / 98EWD9X1
Technical data
| Brand | BMW |
|---|---|
| Car model | 5 Serie - Sedan |
| Engine | N63B44 |
| Fuel | Petrol |
| Displacement | 4.4 |
| Power | 450.0PS / 331.0kW |
| Control unit | Bosch MEVD17.2.H |
|---|---|
| ECU maker | Bosch |
| Hardware number | #C1#DST#MEVD17.2.H-N63TUE-B44-O1-F10-ULEV2-AG-_LL-RL-RWD |
| Software number | 1037533755 |
| File type | Original flash read |
|---|---|
| File size | 4,160.00 KB (4,259,840 bytes) |
| File key | 0152fe0d44fa6c5c |
| ECU name | MEVD17.2.H | |
|---|---|---|
| Read type | Full read (boot area included) | |
| Processor | TC1797 | |
| Bosch part / software | 1037540064 | Offset in the file: 0x18001A |
| Software / calibration | 8AC98E0B / 98EWD9X1 | Offset in the file: 0x1FFE01 |
| Data set description | MEVD17.2.H-N63TUE-B44-O1-F10-ULEV2-AG-_LL-RL-RWD | |
| Internal build string | MEVD17.2.H-CB_L6C-D6.2.0_G.5.15.1 | Offset in the file: 0x00FDCC |
| Bosch project identifier (EPK) | 43/1/MEVD/11/MEVD172H_8AC98E0B//8AC98E0B/// | Offset in the file: 0x17FB0C |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch MEVD17.2.H whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number #C1#DST#MEVD17.2.H-N63TUE-B44-O1-F10-ULEV2-AG-_LL-RL-RWD and software number 1037533755. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch MEVD17.2.H
| Hardware | Software | Vehicles |
|---|---|---|
| 8BC2600B | BMW F10/F11/F18 M | |
| 8BC98BGB#506_S63T1_F010_BG20_EUR_Fzg161 | BMW 5 Serie - Sedan | |
| #C1#DST#MEVD17.2.H-N63TUE-B44-O1-F07-ULEV2-AG-_LL-RL-RWD | 10SW012214 | BMW 5er GT |
| #C1#DST#MEVD17.2.H-N63TUE-B44-O1-F10-ULEV2-AG-_LL-RL-AWD | 10SW012214 | BMW 5er |
| #C1#DST#MEVD17.2.H-S63Tue-B44-T1-F010-EU6-DKG | 10SW005946 | BMW F10/F11/F18 M5 |
| #C1#DST#MEVD17.2.H-S63Tue-B44-T1-F010-EU6-DKG-_SWT | 1037542871 | BMW 5er |
| #C1#DST#MEVD17.2.H-S63Tue-B44-T1-F010-ULEV2---_DKG-SWT-P-St3 | 10SW005946 | BMW 6er |
| #C1#DST#MEVD17.2.H-S63Tue-B44-T2-F085-EU6-8HP__BG1.1 | 1037545823 | BMW X6 M SUV, BMW F86, BMW X6 |