Original file
BMW F10/F11/F18 M5 Bosch MEVD17.2.H #C1#DST#MEVD17.2.H-S63Tue-B44-T1-F010-EU6-DKG / 10SW005946
An original (stock) flash read of the Bosch MEVD17.2.H control unit, fitted in BMW F10/F11/F18 M5, hardware number #C1#DST#MEVD17.2.H-S63Tue-B44-T1-F010-EU6-DKG and software number 10SW005946, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- BMW F10/F11/F18 M54.4 petrol 560PS
- Control unit
- Bosch MEVD17.2.H
- Read type
- Full read (boot area included)
- File
- 4,096.00 KB · Flash
- Hardware number
- #C1#DST#MEVD17.2.H-S63Tue-B44-T1-F010-EU6-DKG
- Software number
- 10SW005946
- Software / calibration
- 8BC98BGB
Technical data
| Brand | BMW |
|---|---|
| Car model | F10/F11/F18 M5 |
| Engine | 4.4 petrol 560PS |
| Power | 560.0PS / 411.9kW |
| Control unit | Bosch MEVD17.2.H |
|---|---|
| ECU maker | Bosch |
| Hardware number | #C1#DST#MEVD17.2.H-S63Tue-B44-T1-F010-EU6-DKG |
| Software number | 10SW005946 |
| File type | Original flash read |
|---|---|
| File size | 4,096.00 KB (4,194,304 bytes) |
| File key | b3ae69c52f321a73 |
| ECU name | MEVD17.2.H | |
|---|---|---|
| Read type | Full read (boot area included) | |
| Bosch part / software | 10SW005946 | Offset in the file: 0x18001A |
| Software / calibration | 8BC98BGB | Offset in the file: 0x1FFE01 |
| Data set description | MEVD17.2.H-S63Tue-B44-T1-F010-EU6-DKG | |
| Internal build string | MEVD17.2.H-CB_L6C-D6.2.0_G.5.18.1 | Offset in the file: 0x00FDCC |
| Bosch project identifier (EPK) | 43/1/MEVD/11/MEVD172H_8BC98BGB//8BC98BGB/// | Offset in the file: 0x17FB0C |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch MEVD17.2.H whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number #C1#DST#MEVD17.2.H-S63Tue-B44-T1-F010-EU6-DKG and software number 10SW005946. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch MEVD17.2.H
| Hardware | Software | Vehicles |
|---|---|---|
| 8BC98BGB#506_S63T1_F010_BG20_EUR_Fzg161 | BMW 5 Serie - Sedan | |
| #C1#DST#MEVD17.2.H-N63TUE-B44-O1-F07-ULEV2-AG-_LL-RL-RWD | 10SW012214 | BMW 5er GT |
| #C1#DST#MEVD17.2.H-N63TUE-B44-O1-F10-ULEV2-AG-_LL-RL-AWD | 10SW012214 | BMW 5er |
| #C1#DST#MEVD17.2.H-N63TUE-B44-O1-F10-ULEV2-AG-_LL-RL-RWD | 1037533755 | BMW 5 Serie - Sedan |
| #C1#DST#MEVD17.2.H-S63Tue-B44-T1-F010-EU6-DKG-_SWT | 1037542871 | BMW 5er |
| #C1#DST#MEVD17.2.H-S63Tue-B44-T1-F010-ULEV2---_DKG-SWT-P-St3 | 10SW005946 | BMW 6er |
| #C1#DST#MEVD17.2.H-S63Tue-B44-T2-F085-EU6-8HP__BG1.1 | 1037545823 | BMW X6 M SUV, BMW F86, BMW X6 |
| #C1#DST#MEVD17.2.H-S63Tue-B44-T2-F085-EU6-8HP__BG1.1 | 10SW005946 | BMW X6 M SUV, BMW X5, BMW X5 M F85 11 |