Original file
BMW 5 Serie - Sedan Bosch MEVD17.2.H DST#MEVD17.2.H-N63TUE-B44-O1-F10-EU6-AG-LL_-RL-AWD / 1037539310
An original (stock) flash read of the Bosch MEVD17.2.H control unit, fitted in BMW 5 Serie - Sedan, hardware number DST#MEVD17.2.H-N63TUE-B44-O1-F10-EU6-AG-LL_-RL-AWD and software number 1037539310, 4,160.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- BMW 5 Serie - SedanN63B44 · 450.0PS / 331.0kW
- Control unit
- Bosch MEVD17.2.H
- Read type
- Full read (boot area included)
- File
- 4,160.00 KB · Flash
- Hardware number
- DST#MEVD17.2.H-N63TUE-B44-O1-F10-EU6-AG-LL_-RL-AWD
- Software number
- 1037539310
- Bosch part / software
- 10SW003192
- Software / calibration
- 8AC9F65B / 9F6WC8X2
Technical data
| Brand | BMW |
|---|---|
| Car model | 5 Serie - Sedan |
| Engine | N63B44 |
| Fuel | Petrol |
| Displacement | 4.4 |
| Power | 450.0PS / 331.0kW |
| Control unit | Bosch MEVD17.2.H |
|---|---|
| ECU maker | Bosch |
| Hardware number | DST#MEVD17.2.H-N63TUE-B44-O1-F10-EU6-AG-LL_-RL-AWD |
| Software number | 1037539310 |
| File type | Original flash read |
|---|---|
| File size | 4,160.00 KB (4,259,840 bytes) |
| File key | 3f975abfa0a9f864 |
| ECU name | MEVD17.2.H | |
|---|---|---|
| Read type | Full read (boot area included) | |
| Processor | TC1797 | |
| Bosch part / software | 10SW003192 | Offset in the file: 0x18001A |
| Software / calibration | 8AC9F65B / 9F6WC8X2 | Offset in the file: 0x1FFE01 |
| Data set description | MEVD17.2.H-N63TUE-B44-O1-F10-EU6-AG-LL_-RL-AWD | |
| Internal build string | MEVD17.2.H-CB_L6C-D6.2.0_G.5.15.1 | Offset in the file: 0x00FDCC |
| Bosch project identifier (EPK) | 43/1/MEVD/11/MEVD172H_8AC9F65B//8AC9F65B/// | Offset in the file: 0x17FB0C |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch MEVD17.2.H whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number DST#MEVD17.2.H-N63TUE-B44-O1-F10-EU6-AG-LL_-RL-AWD and software number 1037539310. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.