Original file

BMW X5 Bosch MEVD17.2.H DST#MEVD17.2.H-N63TUE-B44-O1-F15-F16-EU6--_AG-LL-RL-OEDS-AWD / 8AC9F80B#9F8WXXX1

An original (stock) flash read of the Bosch MEVD17.2.H control unit, fitted in BMW X5, hardware number DST#MEVD17.2.H-N63TUE-B44-O1-F15-F16-EU6--_AG-LL-RL-OEDS-AWD and software number 8AC9F80B#9F8WXXX1, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW X5N63B44 · 449.0PS / 330.2kW
Control unit
Bosch MEVD17.2.H
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
DST#MEVD17.2.H-N63TUE-B44-O1-F15-F16-EU6--_AG-LL-RL-OEDS-AWD
Software number
8AC9F80B#9F8WXXX1
Bosch part / software
10SW012214
Software / calibration
8AC9F80B / 9F8WXXX1

Technical data

Vehicle
BrandBMW
Car modelX5
EngineN63B44
FuelPetrol
Displacement4.4
Power449.0PS / 330.2kW
Control unit
Control unitBosch MEVD17.2.H
ECU makerBosch
Hardware numberDST#MEVD17.2.H-N63TUE-B44-O1-F15-F16-EU6--_AG-LL-RL-OEDS-AWD
Software number8AC9F80B#9F8WXXX1
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keyd7155025e226426b
Identification read from the file
ECU nameMEVD17.2.H
Read typeFull read (boot area included)
Bosch part / software10SW012214Offset in the file: 0x18001A
Software / calibration8AC9F80B / 9F8WXXX1Offset in the file: 0x1FFE01
Data set descriptionMEVD17.2.H-N63TUE-B44-O1-F15-F16-EU6--_AG-LL-RL-OEDS-AWD
Bosch project identifier (EPK)43/1/MEVD/11/MEVD172H_8AC9F80B//8AC9F80B///Offset in the file: 0x1FFB0C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MEVD17.2.H whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number DST#MEVD17.2.H-N63TUE-B44-O1-F15-F16-EU6--_AG-LL-RL-OEDS-AWD and software number 8AC9F80B#9F8WXXX1. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
BMW X5 SUVFlash2,048.00 KB€15Add to cart

All reads of DST#MEVD17.2.H-N63TUE-B44-O1-F15-F16-EU6--_AG-LL-RL-OEDS-AWD / 8AC9F80B#9F8WXXX1

Other pairs of Bosch MEVD17.2.H

Bosch MEVD17.2.H original files

The Bosch MEVD17.2.H unit page