Original file

BMW 4 Serie - Cabrio Bosch MEVD17.2.P 0170353053 / 1037540114

An original (stock) flash read of the Bosch MEVD17.2.P control unit, fitted in BMW 4 Serie - Cabrio, hardware number 0170353053 and software number 1037540114, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW 4 Serie - Cabrio2.0 petrol · 245.0PS / 180.2kW
Control unit
Bosch MEVD17.2.P
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
0170353053
Software number
1037540114
Bosch part / software
10SW017243
Software / calibration
9VT9G40B / 9G4LNCX2

Technical data

Vehicle
BrandBMW
Car model4 Serie - Cabrio
Engine2.0 petrol
Power245.0PS / 180.2kW
Control unit
Control unitBosch MEVD17.2.P
ECU makerBosch
Hardware number0170353053
Software number1037540114
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keyfa7eb85c538895c2
Identification read from the file
ECU nameMEVD17.2.9
Read typeFull read (boot area included)
ProcessorTC1797
Bosch part / software10SW017243Offset in the file: 0x18001A
Software / calibration9VT9G40B / 9G4LNCX2Offset in the file: 0x1FFE01
Data set descriptionMEVD17.2.P-N20-Mo-B20-O0-F033-EU6-HGAG_-LL-RL
Internal build stringMEVD17.2.9-CB_L6C-D6.2.0_G.5.18.1Offset in the file: 0x00FDBC
Bosch project identifier (EPK)43/1/MEVD/11/MEVD1729_9VT9G40B//9VT9G40B///Offset in the file: 0x17FB0C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MEVD17.2.P whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0170353053 and software number 1037540114. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MEVD17.2.P

Bosch MEVD17.2.P original files

The Bosch MEVD17.2.P unit page