Original file

BMW 3 Serie - Touring Bosch MEVD17.2.P 9VT9E80B#9E8LEUX2 / 1037537945

An original (stock) flash read of the Bosch MEVD17.2.P control unit, fitted in BMW 3 Serie - Touring, hardware number 9VT9E80B#9E8LEUX2 and software number 1037537945, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW 3 Serie - Touring268HP
Control unit
Bosch MEVD17.2.P
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
9VT9E80B#9E8LEUX2
Software number
1037537945
Software / calibration
9VT9E80B / 9E8LEUX2

Technical data

Vehicle
BrandBMW
Car model3 Serie - Touring
Engine268HP
FuelPetrol
Displacement2.0
Control unit
Control unitBosch MEVD17.2.P
ECU makerBosch
Hardware number9VT9E80B#9E8LEUX2
Software number1037537945
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keyc8a57738a377b28d
Identification read from the file
ECU nameMEVD17.2.9
Read typeCalibration only (data set)
Bosch part / software1037537945Offset in the file: 0x18001A
Software / calibration9VT9E80B / 9E8LEUX2Offset in the file: 0x1FFE01
Data set descriptionMEVD17.2.P-N20-Mo-B20-U0-F031-EU6-HGAG_-LL-RL-ALLRAD-JAPAN
Bosch project identifier (EPK)43/1/MEVD/11/MEVD1729_9VT9E80B//9VT9E80B///Offset in the file: 0x1FFB0C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MEVD17.2.P whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 9VT9E80B#9E8LEUX2 and software number 1037537945. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MEVD17.2.P

HardwareSoftwareVehicles
9VT9E80B#9E8LDDX11037537945BMW 3 Serie - Sedan
9VT9E80B#9E8LECX21037537945BMW X3 SUV
9VT9E80B#9E8LEJX21037537945BMW F20
9VT9E80B#9E8LEMX21037537945BMW 1 Serie - 5drs
9VT9E80B#9E8LHIX11037537945BMW F20
9VT9E80B#9E8LHMX21037537945BMW F30
9VT9E80B#9E8LMTX21037537945BMW 3 Serie - Gran Turismo
9VT9E85B#9E8LGLY09VT9E85BBMW 3 Serie - Gran Turismo 328i

Bosch MEVD17.2.P original files

The Bosch MEVD17.2.P unit page