Original file

BMW 3 Serie - Gran Turismo 328i Bosch MEVD17.2.P 9VT9E85B#9E8LGLY0 / 9VT9E85B

An original (stock) flash read of the Bosch MEVD17.2.P control unit, fitted in BMW 3 Serie - Gran Turismo 328i, hardware number 9VT9E85B#9E8LGLY0 and software number 9VT9E85B, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW 3 Serie - Gran Turismo 328ipetrol 245.0PS / 180.2kW
Control unit
Bosch MEVD17.2.P
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
9VT9E85B#9E8LGLY0
Software number
9VT9E85B
Bosch part / software
10SW005578
Software / calibration
9VT9E85B / 9E8LGLY0

Technical data

Vehicle
BrandBMW
Car model3 Serie - Gran Turismo 328i
Enginepetrol 245.0PS / 180.2kW
Displacement2.0
Control unit
Control unitBosch MEVD17.2.P
ECU makerBosch
Hardware number9VT9E85B#9E8LGLY0
Software number9VT9E85B
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key24a3f09c5872f0f9
Identification read from the file
ECU nameMEVD17.2.9
Read typeFull read (boot area included)
Bosch part / software10SW005578Offset in the file: 0x18001A
Software / calibration9VT9E85B / 9E8LGLY0Offset in the file: 0x1FFE01
Data set descriptionMEVD17.2.P-N20-Mo-B20-O0-F034-EU6-HGAG_-LL-RL
Bosch project identifier (EPK)43/1/MEVD/11/MEVD1729_9VT9E85B//9VT9E85B///Offset in the file: 0x1FFB0C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MEVD17.2.P whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 9VT9E85B#9E8LGLY0 and software number 9VT9E85B. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MEVD17.2.P

Bosch MEVD17.2.P original files

The Bosch MEVD17.2.P unit page