Original file

BMW 3 Serie - Sedan 420i Bosch MEVD17.2.P 9VT9G40B#9G4LCBX6 / 1037545128

An original (stock) flash read of the Bosch MEVD17.2.P control unit, fitted in BMW 3 Serie - Sedan 420i, hardware number 9VT9G40B#9G4LCBX6 and software number 1037545128, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW 3 Serie - Sedan 420ipetrol 184.0PS / 135.3kW
Control unit
Bosch MEVD17.2.P
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
9VT9G40B#9G4LCBX6
Software number
1037545128
Bosch part / software
10SW017243
Software / calibration
9VT9G40B / 9G4LCBX6

Technical data

Vehicle
BrandBMW
Car model3 Serie - Sedan 420i
Enginepetrol 184.0PS / 135.3kW
Displacement2.0
Control unit
Control unitBosch MEVD17.2.P
ECU makerBosch
Hardware number9VT9G40B#9G4LCBX6
Software number1037545128
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key7dc582b83543d374
Identification read from the file
ECU nameMEVD17.2.9
Read typeFull read (boot area included)
ProcessorTC1797
Bosch part / software10SW017243Offset in the file: 0x18001A
Software / calibration9VT9G40B / 9G4LCBX6Offset in the file: 0x1FFE01
Data set descriptionMEVD17.2.P-N20-Mo-B20-U0-F030-EU6-HG-A_G-LL-RL-ALLRAD
Internal build stringMEVD17.2.9-CB_L6C-D6.2.0_G.5.18.1Offset in the file: 0x00FDBC
Bosch project identifier (EPK)43/1/MEVD/11/MEVD1729_9VT9G40B//9VT9G40B///Offset in the file: 0x17FB0C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MEVD17.2.P whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 9VT9G40B#9G4LCBX6 and software number 1037545128. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MEVD17.2.P

HardwareSoftwareVehicles
9VT9G20B#9G2LDQXC9VT9G20BBMW 4er 420i
9VT9G20B#9G2LEMX29VT9G20BBMW 2er 220i
9VT9G40B#9G4LBIX69VT9G40BBMW 3 Serie - Sedan 320i
9VT9G40B#9G4LBUX59VT9G40BBMW X5 X5-28i
9VT9G40B#9G4LELX29VT9G40BBMW 2er 220i
9VT9G40B#9G4LNAX29VT9G40BBMW 4 Serie - Cabrio 428i
9VT9G40B#9G4LNCX69VT9G40BBMW 4 Serie - Cabrio 428i
9VU9E80B#9E8LHXX21037537921BMW F35

Bosch MEVD17.2.P original files

The Bosch MEVD17.2.P unit page