Original file

Alpina B3 B3 Bi-Turbo Bosch MEVD17.2.x 00001ABF131E01 / 1037531025

An original (stock) flash read of the Bosch MEVD17.2.x control unit, fitted in Alpina B3 B3 Bi-Turbo, hardware number 00001ABF131E01 and software number 1037531025, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Alpina B3 B3 Bi-Turbopetrol 410.0PS / 301.6kW
Control unit
Bosch MEVD17.2.x
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
00001ABF131E01
Software number
1037531025
Software / calibration
75X9BK0B / 00001F54

Technical data

Vehicle
BrandAlpina
Car modelB3 B3 Bi-Turbo
Enginepetrol 410.0PS / 301.6kW
Displacement2.0
Control unit
Control unitBosch MEVD17.2.x
ECU makerBosch
Hardware number00001ABF131E01
Software number1037531025
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keyea26e7374c0506b2
Identification read from the file
ECU nameMEVD17.2.6
Read typeFull read (boot area included)
Bosch part / software1037531025Offset in the file: 0x18001A
Software / calibration75X9BK0B / 00001F54Offset in the file: 0x1FFE01
Data set descriptionMEVD17.2.6-N55-ML-R20-F032-EU6-MSA2-AG_AG-LL-4WD-CHDP-ALP-NOV13-8633370
Internal build stringN55-Alpina-CB_L6C-D6.2.0_G.5.14.0Offset in the file: 0x00FDBC
Bosch project identifier (EPK)40/1/MED17/11/MEVD172X//75X9BK0B/Dst00//Offset in the file: 0x17FB0C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MEVD17.2.x whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 00001ABF131E01 and software number 1037531025. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MEVD17.2.x

HardwareSoftwareVehicles
000017D30313021037528634BMW 5 Serie - Sedan
000019351310SW001405BMW X5 SUV
000019351310SW003920BMW X5 SUV
000019A81382011037526530BMW 3 Serie - Touring 320i
00012430321037528736BMW 3er
00300046201037503729BMW 5 Serie - Gran Turismo
00300100951037509058BMW 5 Serie - Sedan
00300563931037525979BMW 1 Serie - 5drs

Bosch MEVD17.2.x original files

The Bosch MEVD17.2.x unit page