Original file

BMW Bosch MEVD17.2.x 008798098G0BQFL4S / 1037533822

An original (stock) flash read of the Bosch MEVD17.2.x control unit, fitted in BMW, hardware number 008798098G0BQFL4S and software number 1037533822, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW2.0 petrol
Control unit
Bosch MEVD17.2.x
Read type
Calibration only (data set)
File
4,096.00 KB · Flash
Hardware number
008798098G0BQFL4S
Software number
1037533822

Technical data

Vehicle
BrandBMW
Engine2.0 petrol
Control unit
Control unitBosch MEVD17.2.x
ECU makerBosch
Hardware number008798098G0BQFL4S
Software number1037533822
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key44a0db50322682cd
Identification read from the file
ECU nameMEVD17.2.X
Read typeCalibration only (data set)
Bosch part / software1037533822Offset in the file: 0x18001A
Software / calibration008798098G0BQFL4SOffset in the file: 0x180079
Bosch project identifier (EPK)40/1/MED17/11/MEVD172X//79898G0B/Dst00//Offset in the file: 0x1FFB0C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MEVD17.2.x whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 008798098G0BQFL4S and software number 1037533822. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MEVD17.2.x

HardwareSoftwareVehicles
008798098G0BQFC4S1037533822BMW 3 Serie
008798098G0BQFE3S1037533822BMW E70/E71
008798098G0BQFI2S1037533822BMW 3 Serie
008798098G0BQFI4S1037533822BMW 3er
008798098G0BQFM2S1037533822BMW E60/E61, BMW 3er, BMW 5er
008798098G0BQFM5S1037533822BMW E90/E91/ E92/E93
008798098G0BQFT5S1037533822BMW E81/E87
008798098G0BQSR2S1037533822BMW E90/E91/ E92/E93

Bosch MEVD17.2.x original files

The Bosch MEVD17.2.x unit page