Original file

BMW E90/E91/ E92/E93 Bosch MEVD17.2.x 008798098H1BQSR0S / 1008798098

An original (stock) flash read of the Bosch MEVD17.2.x control unit, fitted in BMW E90/E91/ E92/E93, hardware number 008798098H1BQSR0S and software number 1008798098, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW E90/E91/ E92/E933.0 · 306.0PS / 225.1kW
Control unit
Bosch MEVD17.2.x
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
008798098H1BQSR0S
Software number
1008798098
Bosch part / software
10SW010883

Technical data

Vehicle
BrandBMW
Car modelE90/E91/ E92/E93
Engine3.0
FuelPetrol
Power306.0PS / 225.1kW
Control unit
Control unitBosch MEVD17.2.x
ECU makerBosch
Hardware number008798098H1BQSR0S
Software number1008798098
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key6cc95884022bdb76
Identification read from the file
ECU nameMEVD17.2.X
Read typeFull read (boot area included)
Bosch part / software10SW010883Offset in the file: 0x18001A
Software / calibration008798098H1BQSR0SOffset in the file: 0x180079
Bosch project identifier (EPK)40/1/MED17/11/MEVD172X//79898H1B/Dst00//Offset in the file: 0x1FFB0C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MEVD17.2.x whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 008798098H1BQSR0S and software number 1008798098. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MEVD17.2.x

Bosch MEVD17.2.x original files

The Bosch MEVD17.2.x unit page