Original file

BMW Bosch MEVD17.2.x 00879S09B61BHFR2S / 1037521364

An original (stock) flash read of the Bosch MEVD17.2.x control unit, fitted in BMW, hardware number 00879S09B61BHFR2S and software number 1037521364, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW
Control unit
Bosch MEVD17.2.x
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
00879S09B61BHFR2S
Software number
1037521364

Technical data

Vehicle
BrandBMW
Control unit
Control unitBosch MEVD17.2.x
ECU makerBosch
Hardware number00879S09B61BHFR2S
Software number1037521364
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key9bee062626840843
Identification read from the file
ECU nameMEVD17.2.X
Read typeCalibration only (data set)
Bosch part / software1037521364Offset in the file: 0x18001A
Software / calibration00879S09B61BHFR2SOffset in the file: 0x180079
Bosch project identifier (EPK)40/1/MED17/11/MEVD172X//79S9B61B/Dst00//Offset in the file: 0x1FFB0C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MEVD17.2.x whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 00879S09B61BHFR2S and software number 1037521364. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MEVD17.2.x

Bosch MEVD17.2.x original files

The Bosch MEVD17.2.x unit page