Original file

BMW 3er Bosch MEVD17.2.x 0261S06348 / 1039S40362

An original (stock) flash read of the Bosch MEVD17.2.x control unit, fitted in BMW 3er, hardware number 0261S06348 and software number 1039S40362, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW 3er5.0 · 18HP
Control unit
Bosch MEVD17.2.x
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
0261S06348
Software number
1039S40362
Bosch part / software
0261S17889 / 10SW010883
DME hardware number
8684922
Software / calibration
008798098H1BQFM0S

Technical data

Vehicle
BrandBMW
Car model3er
Engine5.0
Power18HP
Control unit
Control unitBosch MEVD17.2.x
ECU makerBosch
Hardware number0261S06348
Software number1039S40362
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key16e0ecaf96f91580
Identification read from the file
ECU nameMEVD17.2.X
Read typeFull read (boot area included)
ProcessorTC1797
Bosch part / software0261S17889 / 10SW010883Offset in the file: 0x00D8C6 / 0x02001A
DME hardware number8684922Offset in the file: 0x00D8AA
Software / calibration008798098H1BQFM0SOffset in the file: 0x180079
Internal build string011_G.8.7.0_MEVD172_P_NROffset in the file: 0x00D558
Bosch project identifier (EPK)40/1/MED17/11/MEVD172X//79898H1B/Dst00//Offset in the file: 0x17FB0C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MEVD17.2.x whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0261S06348 and software number 1039S40362. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MEVD17.2.x

HardwareSoftwareVehicles
0261S063481037512171BMW F10/F11/F18, BMW E90/E91/ E92/E93, BMW E81/E87
0261S063481037518222BMW 1er, BMW 3er
0261S063481037524499BMW 3er, BMW 1er, BMW 3
0261S063481037533822BMW 1er, BMW 3er, BMW X5
0261S064931037509058BMW 5 Serie - Sedan, BMW F10/F11/F18, BMW 5 Serie - Sedan 3.0T
0261S064991037509039BMW 3er, BMW X6, BMW X5
0261S064991037515485BMW E70
0261S064991037515932BMW 1er

Bosch MEVD17.2.x original files

The Bosch MEVD17.2.x unit page