Original file

BMW F10/F11/F18 Bosch MEVD17.2.x 0261S07565 / 1037518209

An original (stock) flash read of the Bosch MEVD17.2.x control unit, fitted in BMW F10/F11/F18, hardware number 0261S07565 and software number 1037518209, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW F10/F11/F183.0 petrol 306PS
Control unit
Bosch MEVD17.2.x
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
0261S07565
Software number
1037518209
Bosch part / software
1037547650
Software / calibration
75B98G5B / 98GVIOX4

Technical data

Vehicle
BrandBMW
Car modelF10/F11/F18
Engine3.0 petrol 306PS
Power306.0PS / 225.1kW
Control unit
Control unitBosch MEVD17.2.x
ECU makerBosch
Hardware number0261S07565
Software number1037518209
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key91e161d67ba70239
Identification read from the file
ECU nameMEVD17.2.X
Read typeFull read (boot area included)
ProcessorTC1797
Bosch part / software1037547650Offset in the file: 0x18001A
Software / calibration75B98G5B / 98GVIOX4Offset in the file: 0x1FFE01
Data set descriptionMEVD17.2-N55-M0-B30-F011-EU5-MSA2-AG-L_L-RL-PVL
Internal build stringMEVD17.2-CB_L6C-D.6.2.0_G.5.7.0Offset in the file: 0x00FDBC
Bosch project identifier (EPK)40/1/MED17/11/MEVD172X//75B98G5B/Dst00//Offset in the file: 0x17FB0C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MEVD17.2.x whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0261S07565 and software number 1037518209. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MEVD17.2.x

HardwareSoftwareVehicles
0261S067271037533822BMW E81/E87, BMW 3er, BMW E70
0261S072721037524499BMW X5
0261S073311037515925BMW F10/F11/F18
0261S073341037515932BMW 3er, BMW X5, BMW 1er
0261S075921037518222BMW X6, BMW 3er, BMW E90/E91/ E92/E93
0261S084381037524499BMW 3er, BMW X6
0261S097431037533822BMW 3er, BMW E90/E91/ E92/E93, BMW 1 Serie
0261S110871037545823BMW 5 Serie - Sedan

Bosch MEVD17.2.x original files

The Bosch MEVD17.2.x unit page