Original file

BMW 2er Bosch MEVD17.2.x 0261S14702 / 10SW000383

An original (stock) flash read of the Bosch MEVD17.2.x control unit, fitted in BMW 2er, hardware number 0261S14702 and software number 10SW000383, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW 2er3.0 petrol 369PS
Control unit
Bosch MEVD17.2.x
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
0261S14702
Software number
10SW000383
Bosch part / software
10SW014408
Software / calibration
75Z9G0EB / 490_N55_F087_EU6_DKG_038

Technical data

Vehicle
BrandBMW
Car model2er
Engine3.0 petrol 369PS
Power369.8PS / 272.1kW
Control unit
Control unitBosch MEVD17.2.x
ECU makerBosch
Hardware number0261S14702
Software number10SW000383
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key882e16f6717652fa
Identification read from the file
ECU nameMEVD17.2.G
Read typeFull read (boot area included)
ProcessorTC1797
Bosch part / software10SW014408Offset in the file: 0x18001A
Software / calibration75Z9G0EB / 490_N55_F087_EU6_DKG_038Offset in the file: 0x1FFE01
Data set descriptionMEVD17.2.G-N55-T0-B30-F087-DKG-EU6
Internal build stringMEVD17.2.G-CB_L6C-D6.2.0_G.5.18.1Offset in the file: 0x00FDBC
Bosch project identifier (EPK)43/1/MEVD/11/MEVD172G_75Z9G0EB//75Z9G0EB///Offset in the file: 0x17FB0C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MEVD17.2.x whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0261S14702 and software number 10SW000383. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MEVD17.2.x

HardwareSoftwareVehicles
0261S084381037524499BMW 3er, BMW X6
0261S097431037533822BMW 3er, BMW E90/E91/ E92/E93, BMW 1 Serie
0261S110871037545823BMW 5 Serie - Sedan
0261S145621037554814BMW 6er
0261S1549410SW001961BMW F22
0261S1562210SW003187BMW F87 M2
0261S160001037545823BMW 5 Serie - Sedan
0261S174511037518229BMW X1

Bosch MEVD17.2.x original files

The Bosch MEVD17.2.x unit page