Original file

BMW F22 Bosch MEVD17.2.x 0261S15494 / 10SW001961

An original (stock) flash read of the Bosch MEVD17.2.x control unit, fitted in BMW F22, hardware number 0261S15494 and software number 10SW001961, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW F223.0 petrol 326PS
Control unit
Bosch MEVD17.2.x
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
0261S15494
Software number
10SW001961
Software / calibration
75Q9H10B / 9H1JCGX2

Technical data

Vehicle
BrandBMW
Car modelF22
Engine3.0 petrol 326PS
Power326.0PS / 239.8kW
Control unit
Control unitBosch MEVD17.2.x
ECU makerBosch
Hardware number0261S15494
Software number10SW001961
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key6badaf730947e43c
Identification read from the file
ECU nameMEVD17.2.G
Read typeFull read (boot area included)
ProcessorTC1797
Bosch part / software10SW001961Offset in the file: 0x18001A
Software / calibration75Q9H10B / 9H1JCGX2Offset in the file: 0x1FFE01
Data set descriptionMEVD17.2.G-N55-O0-B30-F022-EU6-MSA2-HG_AG-LL-RL-CVO-BHDP
Internal build stringMEVD17.2.G-CB_L6C-D6.2.0_G.5.15.1Offset in the file: 0x00FDBC
Bosch project identifier (EPK)43/1/MEVD/11/MEVD172G_75Q9H10B//75Q9H10B///Offset in the file: 0x17FB0C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MEVD17.2.x whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0261S15494 and software number 10SW001961. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MEVD17.2.x

HardwareSoftwareVehicles
0261S097431037533822BMW 3er, BMW E90/E91/ E92/E93, BMW 1 Serie
0261S110871037545823BMW 5 Serie - Sedan
0261S145621037554814BMW 6er
0261S1470210SW000383BMW 2er
0261S1562210SW003187BMW F87 M2
0261S160001037545823BMW 5 Serie - Sedan
0261S174511037518229BMW X1
0261S178891008798098BMW 3er

Bosch MEVD17.2.x original files

The Bosch MEVD17.2.x unit page