Original file

BMW 5 Serie - Touring Bosch MEVD17.2.x 028157301 / 1037518209

An original (stock) flash read of the Bosch MEVD17.2.x control unit, fitted in BMW 5 Serie - Touring, hardware number 028157301 and software number 1037518209, 12,288.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW 5 Serie - Touringpetrol 305.9PS / 225.0kW
Control unit
Bosch MEVD17.2.x
Read type
Full read (boot area included)
File
12,288.00 KB · Flash
Hardware number
028157301
Software number
1037518209
Software / calibration
75B98D0B / 98DVIOX4

Technical data

Vehicle
BrandBMW
Car model5 Serie - Touring
Enginepetrol 305.9PS / 225.0kW
Displacement3.0
Control unit
Control unitBosch MEVD17.2.x
ECU makerBosch
Hardware number028157301
Software number1037518209
File
File typeOriginal flash read
File size12,288.00 KB (12,582,912 bytes)
File key0626dc6b28a116e7
Identification read from the file
ECU nameMEVD17.2.X
Read typeFull read (boot area included)
ProcessorTC1797
Bosch part / software1037518209Offset in the file: 0x18001A
Software / calibration75B98D0B / 98DVIOX4Offset in the file: 0x1FFE01
Data set descriptionMEVD17.2-N55-M0-B30-F011-EU5-MSA2-AG-L_L-RL-PVL
Internal build stringMEVD17.2-CB_L6C-D.6.2.0_G.5.7.0Offset in the file: 0x00FDBC
Bosch project identifier (EPK)40/1/MED17/11/MEVD172X//75B98D0B/Dst00//Offset in the file: 0x17FB0C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MEVD17.2.x whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 028157301 and software number 1037518209. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
BMW 5 Serie - Sedan 3.0iFlash12,288.00 KB€15Add to cart

All reads of 028157301 / 1037518209

Other pairs of Bosch MEVD17.2.x

HardwareSoftwareVehicles
0261S178891037518222BMW X6, BMW X5
0261S178891037533822BMW 3er
0261S178891039S51006BMW X5
0261S1788910SW010883BMW 3er, BMW X5, BMW 1er
0281S061681037506760BMW 5 Serie - Sedan
07190757961037507190BMW F10/F11/F18
071907579691037507190BMW 5er, BMW 5 Serie - Gran Turismo 535i, BMW 5 Serie - Sedan 535i 306hp
07595001751037512170BMW 5 Serie

Bosch MEVD17.2.x original files

The Bosch MEVD17.2.x unit page