Original file

BMW F10/F11/F18 Bosch MEVD17.2.x 0719075796 / 1037507190

An original (stock) flash read of the Bosch MEVD17.2.x control unit, fitted in BMW F10/F11/F18, hardware number 0719075796 and software number 1037507190, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW F10/F11/F18N55B30 · 306.0PS / 225.1kW
Control unit
Bosch MEVD17.2.x
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
0719075796
Software number
1037507190
Bosch part / software
10SW004439
Software / calibration
75B98G6B / 98GVIAX5

Technical data

Vehicle
BrandBMW
Car modelF10/F11/F18
EngineN55B30
FuelPetrol
Displacement3.0
Power306.0PS / 225.1kW
Control unit
Control unitBosch MEVD17.2.x
ECU makerBosch
Hardware number0719075796
Software number1037507190
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key03aba42fb171211d
Identification read from the file
ECU nameMEVD17.2.X
Read typeFull read (boot area included)
ProcessorTC1797
Bosch part / software10SW004439Offset in the file: 0x18001A
Software / calibration75B98G6B / 98GVIAX5Offset in the file: 0x1FFE01
Data set descriptionMEVD17.2-N55-M0-B30-F010-EU5-MSA2-AG-L_L-RL-PVL
Internal build stringMEVD17.2-CB_L6C-D.6.2.0_G.5.7.0Offset in the file: 0x00FDBC
Bosch project identifier (EPK)40/1/MED17/11/MEVD172X//75B98G6B/Dst00//Offset in the file: 0x17FB0C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MEVD17.2.x whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0719075796 and software number 1037507190. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MEVD17.2.x

HardwareSoftwareVehicles
0261S178891039S51006BMW X5
0261S1788910SW010883BMW 3er, BMW X5, BMW 1er
0281573011037518209BMW 5 Serie - Sedan 3.0i, BMW 5 Serie - Touring
0281S061681037506760BMW 5 Serie - Sedan
071907579691037507190BMW 5er, BMW 5 Serie - Gran Turismo 535i, BMW 5 Serie - Sedan 535i 306hp
07595001751037512170BMW 5 Serie
1701303451037544113BMW F82 M4 3.0 Biturbo
7579690B#969QIDX11037507190BMW F10/F11/F18

Bosch MEVD17.2.x original files

The Bosch MEVD17.2.x unit page