Original file

BMW 3 Serie - Sedan Bosch MEVD17.2.x 10SW000000

An original (stock) flash read of the Bosch MEVD17.2.x control unit, fitted in BMW 3 Serie - Sedan, software number 10SW000000, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW 3 Serie - Sedan3.0 petrol 305PS
Control unit
Bosch MEVD17.2.x
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Software number
10SW000000
Software / calibration
75S9EI0B / 9EITARX0

Technical data

Vehicle
BrandBMW
Car model3 Serie - Sedan
Engine3.0 petrol 305PS
Power305.9PS / 225.0kW
Control unit
Control unitBosch MEVD17.2.x
ECU makerBosch
Software number10SW000000
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key35681cfa909458c7
Identification read from the file
ECU nameMEVD17.2.6
Read typeCalibration only (data set)
Bosch part / software10SW000000Offset in the file: 0x18001A
Software / calibration75S9EI0B / 9EITARX0Offset in the file: 0x1FFE01
Data set descriptionMEVD17.2.S-N55-M0-B30-F030-ULEV2-MSA2-_HGAG-LL-RL-Allrad-PVL-BHDP-RT
Bosch project identifier (EPK)43/1/MEVD/11/MEVD1726_75S9EI0B//75S9EI0B///Offset in the file: 0x1FFB0C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MEVD17.2.x whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, software number 10SW000000. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MEVD17.2.x

HardwareSoftwareVehicles
1037544340BMW 3 Serie - Sedan
1037545710BMW E89
1037545824BMW 3 Serie - Sedan iL, BMW 5 Serie
1037547650BMW 5 Serie - Sedan, BMW 5 Serie, BMW F25
10SW000742BMW X5 SUV
10SW001405BMW X5, BMW X5 SUV
10SW003797BMW Z4, BMW X1
10SW003920BMW X5 SUV, BMW X5

Bosch MEVD17.2.x original files

The Bosch MEVD17.2.x unit page