Original file

BMW 5 Serie - Sedan 35i Bosch MEVD17.2.x #75B9780B#978VGBY3 / 1037515925

An original (stock) flash read of the Bosch MEVD17.2.x control unit, fitted in BMW 5 Serie - Sedan 35i, hardware number #75B9780B#978VGBY3 and software number 1037515925, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW 5 Serie - Sedan 35ipetrol 305.9PS / 225.0kW
Control unit
Bosch MEVD17.2.x
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
#75B9780B#978VGBY3
Software number
1037515925
Software / calibration
75B9780B / 978VIAY3

Technical data

Vehicle
BrandBMW
Car model5 Serie - Sedan 35i
Enginepetrol 305.9PS / 225.0kW
Displacement3.0
Control unit
Control unitBosch MEVD17.2.x
ECU makerBosch
Hardware number#75B9780B#978VGBY3
Software number1037515925
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key031c75fe1d4fcafb
Identification read from the file
ECU nameMEVD17.2.X
Read typeCalibration only (data set)
Bosch part / software1037515925Offset in the file: 0x18001A
Software / calibration75B9780B / 978VIAY3Offset in the file: 0x1FFE01
Data set descriptionMEVD17.2-N55-M0-B30-F010-EU5-MSA2-AG-L_L-RL-PVL
Bosch project identifier (EPK)40/1/MED17/11/MEVD172X//75B9780B/Dst00//Offset in the file: 0x1FFB0C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MEVD17.2.x whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number #75B9780B#978VGBY3 and software number 1037515925. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MEVD17.2.x

Bosch MEVD17.2.x original files

The Bosch MEVD17.2.x unit page