Original file

BMW X3 SUV Bosch MEVD17.2.x 75B98G6B#98GVGBX5 / 10SW004439

An original (stock) flash read of the Bosch MEVD17.2.x control unit, fitted in BMW X3 SUV, hardware number 75B98G6B#98GVGBX5 and software number 10SW004439, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW X3 SUVN55B30
Control unit
Bosch MEVD17.2.x
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
75B98G6B#98GVGBX5
Software number
10SW004439
Software / calibration
75B98G6B / 98GVGBX5

Technical data

Vehicle
BrandBMW
Car modelX3 SUV
EngineN55B30
FuelPetrol
Displacement3.0
Control unit
Control unitBosch MEVD17.2.x
ECU makerBosch
Hardware number75B98G6B#98GVGBX5
Software number10SW004439
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key414c27a4e01563b4
Identification read from the file
ECU nameMEVD17.2.X
Read typeFull read (boot area included)
Bosch part / software10SW004439Offset in the file: 0x18001A
Software / calibration75B98G6B / 98GVGBX5Offset in the file: 0x1FFE01
Data set descriptionMEVD17.2-N55-M0-B30-F025-EU5-MSA2-AG-A_llrad-PVL
Bosch project identifier (EPK)40/1/MED17/11/MEVD172X//75B98G6B/Dst00//Offset in the file: 0x1FFB0C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MEVD17.2.x whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 75B98G6B#98GVGBX5 and software number 10SW004439. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MEVD17.2.x

HardwareSoftwareVehicles
75B98G0B#98GVIHX01037533850BMW 5 Serie - Sedan
75B98G0B#98GVIPX21037533850BMW 5 Serie - Touring
75B98G0B#98GVLAX01037533850BMW F12/F13/F06
75B98G0B#98GVLEX21037533850BMW 6 Serie
75B98G6B#98GVIAX510SW004439BMW 5 Serie - Sedan
75B98G6B#98GVIEX510SW004439BMW 5er
75B98G6B#98GVLAX510SW004439BMW 6 Serie - Cabrio, BMW 6 Serie
75H9EI2B#9EIXYIX675H9EI2BBMW 3 Serie - Sedan 335i

Bosch MEVD17.2.x original files

The Bosch MEVD17.2.x unit page