Original file

BMW F10/F11/F18 Bosch MEVD17.2.x 8BC98B8B#501 / 1037542871

An original (stock) flash read of the Bosch MEVD17.2.x control unit, fitted in BMW F10/F11/F18, hardware number 8BC98B8B#501 and software number 1037542871, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW F10/F11/F18S63B44 · 560.0PS / 411.9kW
Control unit
Bosch MEVD17.2.x
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
8BC98B8B#501
Software number
1037542871
Software / calibration
8BC98B8B / 501_S63T1_F010_BG20_USA_HS095

Technical data

Vehicle
BrandBMW
Car modelF10/F11/F18
EngineS63B44
FuelPetrol
Displacement4.4
Power560.0PS / 411.9kW
Control unit
Control unitBosch MEVD17.2.x
ECU makerBosch
Hardware number8BC98B8B#501
Software number1037542871
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keyede5f23d7991f520
Identification read from the file
ECU nameMEVD17.2.H
Read typeCalibration only (data set)
Bosch part / software1037542871Offset in the file: 0x18001A
Software / calibration8BC98B8B / 501_S63T1_F010_BG20_USA_HS095Offset in the file: 0x1FFE01
Data set descriptionMEVD17.2.H-S63Tue-B44-T1-F010-ULEV2-HS
Bosch project identifier (EPK)43/1/MEVD/11/MEVD172H_8BC98B8B//8BC98B8B///Offset in the file: 0x1FFB0C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MEVD17.2.x whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 8BC98B8B#501 and software number 1037542871. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MEVD17.2.x

Bosch MEVD17.2.x original files

The Bosch MEVD17.2.x unit page