Original file

BMW 5er Bosch MEVD17.2.x #C2#DST#MEVD17.2-N55-M0-B30-F010-ULEV2-MSA2-AG_-LL-RL-PVL / 10SW004439

An original (stock) flash read of the Bosch MEVD17.2.x control unit, fitted in BMW 5er, hardware number #C2#DST#MEVD17.2-N55-M0-B30-F010-ULEV2-MSA2-AG_-LL-RL-PVL and software number 10SW004439, 511.75 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW 5er3.0 petrol 306PS
Control unit
Bosch MEVD17.2.x
Read type
Calibration only (data set)
File
511.75 KB · Flash
Hardware number
#C2#DST#MEVD17.2-N55-M0-B30-F010-ULEV2-MSA2-AG_-LL-RL-PVL
Software number
10SW004439
Software / calibration
75B98G6B / 98GVIEX5

Technical data

Vehicle
BrandBMW
Car model5er
Engine3.0 petrol 306PS
Power306.0PS / 225.1kW
Control unit
Control unitBosch MEVD17.2.x
ECU makerBosch
Hardware number#C2#DST#MEVD17.2-N55-M0-B30-F010-ULEV2-MSA2-AG_-LL-RL-PVL
Software number10SW004439
File
File typeOriginal flash read
File size511.75 KB (524,032 bytes)
File key216bf5aa35560a25
Identification read from the file
ECU nameMEVD17.2.X
Read typeCalibration only (data set)
Bosch part / software10SW004439Offset in the file: 0x00001A
Software / calibration75B98G6B / 98GVIEX5Offset in the file: 0x07FD01
Data set descriptionMEVD17.2-N55-M0-B30-F010-ULEV2-MSA2-AG_-LL-RL-PVL
Bosch project identifier (EPK)40/1/MED17/11/MEVD172X//75B98G6B/Dst00//Offset in the file: 0x07FB0C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MEVD17.2.x whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number #C2#DST#MEVD17.2-N55-M0-B30-F010-ULEV2-MSA2-AG_-LL-RL-PVL and software number 10SW004439. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MEVD17.2.x

Bosch MEVD17.2.x original files

The Bosch MEVD17.2.x unit page