Original file

BMW 5er Bosch MEVD17.2.x O_G7E / 1037524472

An original (stock) flash read of the Bosch MEVD17.2.x control unit, fitted in BMW 5er, hardware number O_G7E and software number 1037524472, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW 5er4.4 petrol 560PS
Control unit
Bosch MEVD17.2.x
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
O_G7E
Software number
1037524472
Software / calibration
8BC9585B / 500_S63TUE_BG2_EU_DKG242

Technical data

Vehicle
BrandBMW
Car model5er
Engine4.4 petrol 560PS
Power560.2PS / 411.9kW
Control unit
Control unitBosch MEVD17.2.x
ECU makerBosch
Hardware numberO_G7E
Software number1037524472
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key4f074e8fa9d1cd08
Identification read from the file
ECU nameMEVD17.2.8
Read typeFull read (boot area included)
Bosch part / software1037524472Offset in the file: 0x18001A
Software / calibration8BC9585B / 500_S63TUE_BG2_EU_DKG242Offset in the file: 0x1FFE01
Data set descriptionMEVD17.2.8-S63Tue-B44-T0-F010-EU5-DKG
Bosch project identifier (EPK)40/1/MED17/11/MEVD172X//8BC9585B/Dst00//Offset in the file: 0x1FFB0C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MEVD17.2.x whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number O_G7E and software number 1037524472. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MEVD17.2.x

Bosch MEVD17.2.x original files

The Bosch MEVD17.2.x unit page