Original file

Peugeot 308 Bosch MEVD17.4.4 00B17000834527 / U102R_R5AMCC6_0655F

An original (stock) flash read of the Bosch MEVD17.4.4 control unit, fitted in Peugeot 308, hardware number 00B17000834527 and software number U102R_R5AMCC6_0655F, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Peugeot 3081.6 · 272.0PS / 200.1kW
Control unit
Bosch MEVD17.4.4
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
00B17000834527
Software number
U102R_R5AMCC6_0655F
Bosch part / software
10SW032722

Technical data

Vehicle
BrandPeugeot
Car model308
Engine1.6
FuelPetrol
Power272.0PS / 200.1kW
Control unit
Control unitBosch MEVD17.4.4
ECU makerBosch
Hardware number00B17000834527
Software numberU102R_R5AMCC6_0655F
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keyfe954a5320523058
Identification read from the file
ECU nameMEVD17.4.4
Read typeFull read (boot area included)
ProcessorTC1793
Bosch part / software10SW032722Offset in the file: 0x02001A
Software / calibrationU102R_R5AMCC6_0655FOffset in the file: 0x340078
Internal build stringCB_014_TC1793_3.1.0Offset in the file: 0x00409A
Bosch project identifier (EPK)27/1/MEVD1744/14///U102R///Offset in the file: 0x020098

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MEVD17.4.4 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 00B17000834527 and software number U102R_R5AMCC6_0655F. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MEVD17.4.4

Bosch MEVD17.4.4 original files

The Bosch MEVD17.4.4 unit page