Original file

Peugeot 208 Bosch MEVD17.4.4 00B17000863024 / 1037555416

An original (stock) flash read of the Bosch MEVD17.4.4 control unit, fitted in Peugeot 208, hardware number 00B17000863024 and software number 1037555416, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Peugeot 2081.6 208PS
Control unit
Bosch MEVD17.4.4
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
00B17000863024
Software number
1037555416
Software / calibration
U101R_F1AMCC6_0564F

Technical data

Vehicle
BrandPeugeot
Car model208
Engine1.6 208PS
FuelPetrol
Control unit
Control unitBosch MEVD17.4.4
ECU makerBosch
Hardware number00B17000863024
Software number1037555416
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key3cd3bbd456b34364
Identification read from the file
ECU nameMEVD17.4.4
Read typeFull read (boot area included)
ProcessorTC1793
Bosch part / software1037555416Offset in the file: 0x02001A
Software / calibrationU101R_F1AMCC6_0564FOffset in the file: 0x340078
Internal build stringCB_014_TC1793_3.1.0Offset in the file: 0x00409A
Bosch project identifier (EPK)27/1/MEVD1744/14///U101R///Offset in the file: 0x020098

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MEVD17.4.4 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 00B17000863024 and software number 1037555416. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MEVD17.4.4

Bosch MEVD17.4.4 original files

The Bosch MEVD17.4.4 unit page