Original file

Citroën DS3 Bosch MEVD17.4.4 00B17001984932 / U102R_F1BMAC6_0648F

An original (stock) flash read of the Bosch MEVD17.4.4 control unit, fitted in Citroën DS3, hardware number 00B17001984932 and software number U102R_F1BMAC6_0648F, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Citroën DS31.6 · 207.0PS / 152.2kW
Control unit
Bosch MEVD17.4.4
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
00B17001984932
Software number
U102R_F1BMAC6_0648F
Bosch part / software
10SW004729

Technical data

Vehicle
BrandCitroën
Car modelDS3
Engine1.6
FuelPetrol
Power207.0PS / 152.2kW
Control unit
Control unitBosch MEVD17.4.4
ECU makerBosch
Hardware number00B17001984932
Software numberU102R_F1BMAC6_0648F
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keyd100b7726d4d1abe
Identification read from the file
ECU nameMEVD17.4.4
Read typeFull read (boot area included)
ProcessorTC1793
Bosch part / software10SW004729Offset in the file: 0x02001A
Software / calibrationU102R_F1BMAC6_0648FOffset in the file: 0x340078
Internal build stringCB_014_TC1793_3.1.0Offset in the file: 0x00409A
Bosch project identifier (EPK)27/1/MEVD1744/14///U102R///Offset in the file: 0x020098

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MEVD17.4.4 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 00B17001984932 and software number U102R_F1BMAC6_0648F. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MEVD17.4.4

Bosch MEVD17.4.4 original files

The Bosch MEVD17.4.4 unit page