Original file

Citroën DS3 Bosch MEVD17.4.4 MEVD17.4.4 / 10SW004729

An original (stock) flash read of the Bosch MEVD17.4.4 control unit, fitted in Citroën DS3, hardware number MEVD17.4.4 and software number 10SW004729, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Citroën DS31.6 petrol 208PS
Control unit
Bosch MEVD17.4.4
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
MEVD17.4.4
Software number
10SW004729
Software / calibration
U102R_F1BMAC6_0648F

Technical data

Vehicle
BrandCitroën
Car modelDS3
Engine1.6 petrol 208PS
Power208.0PS / 153.0kW
Control unit
Control unitBosch MEVD17.4.4
ECU makerBosch
Hardware numberMEVD17.4.4
Software number10SW004729
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key1787f84a27d3e0eb
Identification read from the file
ECU nameMEVD17.4.4
Read typeFull read (boot area included)
ProcessorTC1793
Bosch part / software10SW004729Offset in the file: 0x02001A
Software / calibrationU102R_F1BMAC6_0648FOffset in the file: 0x340078
Internal build stringCB_014_TC1793_3.1.0Offset in the file: 0x00409A
Bosch project identifier (EPK)27/1/MEVD1744/14///U102R///Offset in the file: 0x020098

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MEVD17.4.4 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number MEVD17.4.4 and software number 10SW004729. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MEVD17.4.4

HardwareSoftwareVehicles
00B1700266912B1700266912Peugeot 208
00B17003180827U102R_F5AMDC6_0648FPeugeot 308
00B17003557930004729Peugeot 208 GTI
00B17003632728004729Peugeot 208
0261S109501037548833Peugeot 308
0261S1645910SW004729Peugeot 308, Peugeot 208
0261S1645910SW045391Peugeot 208
U091R_F5AMCC6_0521F1037548833Peugeot 308

Bosch MEVD17.4.4 original files

The Bosch MEVD17.4.4 unit page