Original file

Mercedes-Benz A45 S AMG Bosch MG1CP002 0265490200 / 054783

An original (stock) flash read of the Bosch MG1CP002 control unit, fitted in Mercedes-Benz A45 S AMG, hardware number 0265490200 and software number 054783, 7,936.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz A45 S AMG2.0 · 421.0PS / 308.9kW
Control unit
Bosch MG1CP002
File size
7,936.00 KB
Contents
Flash
Hardware number
0265490200
Software number
054783
Bosch part / software
10SW054783
Software / calibration
1399021300

Technical data

Vehicle
BrandMercedes-Benz
Car modelA45 S AMG
Engine2.0
FuelPetrol
Power421.0PS / 308.9kW
Control unit
Control unitBosch MG1CP002
ECU makerBosch
Hardware number0265490200
Software number054783
File
File typeOriginal flash read
File size7,936.00 KB (8,126,464 bytes)
File key7e7024b3b8c349af
Identification read from the file
ECU nameMG1CP002
Bosch part / software10SW054783Offset in the file: 0x000164
Software / calibration1399021300Offset in the file: 0x3B99DF
Data set number1399032000Offset in the file: 0x682EB4
Boot software1399040700Offset in the file: 0x0186D5
Bosch project identifier (EPK)69/1/MG1CP002/289/AMG_MDG1G//MRG1x_19B_FRG_046_00_STAR23_xx_M139xx///Offset in the file: 0x3B99F0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MG1CP002 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0265490200 and software number 054783. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MG1CP002

HardwareSoftwareVehicles
2569035500Mercedes-Benz CLS
000022017110SW034398BMW CLS450
0265490200027113Mercedes-Benz E53 AMG
0265490200034398Mercedes-Benz E53 AMG
02654902001037562481Mercedes-Benz AMG GT 4-door Coupé
02654902001037562662Mercedes-Benz CLA 45AMG 2.0T
026549020010SW027113Mercedes-Benz AMG GT 4-Door, Mercedes-Benz AMG GT 4-door Coupe, Mercedes-Benz CLS53 AMG
026549020010SW029157Mercedes-Benz A45, Mercedes-Benz A45 S, Mercedes-Benz A45S

Bosch MG1CP002 original files

The Bosch MG1CP002 unit page