Original file

Mercedes-Benz AMG GT 4-door Coupé Bosch MG1CP002 0265490200 / 1037562481

An original (stock) flash read of the Bosch MG1CP002 control unit, fitted in Mercedes-Benz AMG GT 4-door Coupé, hardware number 0265490200 and software number 1037562481, 8,448.02 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz AMG GT 4-door Coupé3.0 petrol 367PS
Control unit
Bosch MG1CP002
File size
8,448.02 KB
Contents
Flash
Hardware number
0265490200
Software number
1037562481
Bosch part / software
10SW027113
Software / calibration
2569023000

Technical data

Vehicle
BrandMercedes-Benz
Car modelAMG GT 4-door Coupé
Engine3.0 petrol 367PS
Power367.0PS / 269.9kW
Control unit
Control unitBosch MG1CP002
ECU makerBosch
Hardware number0265490200
Software number1037562481
File
File typeOriginal flash read
File size8,448.02 KB (8,650,768 bytes)
From the file name90
File keyd65c80fefd718e02
Identification read from the file
ECU nameMG1CP002
Bosch part / software10SW027113Offset in the file: 0x000164
Software / calibration2569023000Offset in the file: 0x3DF7C7
Data set number2569030101Offset in the file: 0x6864D2
Boot software2569040600Offset in the file: 0x0186D5
Bosch project identifier (EPK)66/1/MG1CP002/1/DA_MDG1G//MRG1xx_19B_FRG_058_00_PT3xxx_x_M256xx///Offset in the file: 0x3DF7D8

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MG1CP002 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0265490200 and software number 1037562481. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MG1CP002

HardwareSoftwareVehicles
000022017110SW034398BMW CLS450
0265490200027113Mercedes-Benz E53 AMG
0265490200034398Mercedes-Benz E53 AMG
0265490200054783Mercedes-Benz A45 S AMG
02654902001037562662Mercedes-Benz CLA 45AMG 2.0T
026549020010SW027113Mercedes-Benz AMG GT 4-Door, Mercedes-Benz AMG GT 4-door Coupe, Mercedes-Benz CLS53 AMG
026549020010SW029157Mercedes-Benz A45, Mercedes-Benz A45 S, Mercedes-Benz A45S
026549020010SW034398Mercedes-Benz E

Bosch MG1CP002 original files

The Bosch MG1CP002 unit page