Original file

Mercedes-Benz E53 AMG Bosch MG1CP002 0265490200 / 10SW037594

An original (stock) flash read of the Bosch MG1CP002 control unit, fitted in Mercedes-Benz E53 AMG, hardware number 0265490200 and software number 10SW037594, 8,192.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz E53 AMG3.0 petrol 435PS
Control unit
Bosch MG1CP002
File size
8,192.00 KB
Contents
Flash
Hardware number
0265490200
Software number
10SW037594
Software / calibration
2569021700

Technical data

Vehicle
BrandMercedes-Benz
Car modelE53 AMG
Engine3.0 petrol 435PS
Power435PS / 319.9kW
Control unit
Control unitBosch MG1CP002
ECU makerBosch
Hardware number0265490200
Software number10SW037594
File
File typeOriginal flash read
File size8,192.00 KB (8,388,608 bytes)
File keyeeb0e9b4bead8d0b
Identification read from the file
ECU nameMG1CP002
Bosch part / software10SW037594Offset in the file: 0x000144
Software / calibration2569021700Offset in the file: 0x379CC7
Data set number2569036100Offset in the file: 0x640C5C
Boot software2569040600Offset in the file: 0x7D86D5
Bosch project identifier (EPK)66/1/MG1CP002/1/DA_MDG1G//MRG1x_18A_FRG_042_00_Star23_xx_M256xx///Offset in the file: 0x379CD8

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MG1CP002 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0265490200 and software number 10SW037594. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MG1CP002

HardwareSoftwareVehicles
02654902001037562662Mercedes-Benz CLA 45AMG 2.0T
026549020010SW027113Mercedes-Benz AMG GT 4-Door, Mercedes-Benz AMG GT 4-door Coupe, Mercedes-Benz CLS53 AMG
026549020010SW029157Mercedes-Benz A45, Mercedes-Benz A45 S, Mercedes-Benz A45S
026549020010SW034398Mercedes-Benz E
026549020010SW044283Mercedes-Benz CLS E53 MG1CP002
026549020010SW044805Mercedes-Benz Benz C257 CLS53 AMG
026549020010SW047715Mercedes-Benz E / E Coupe, Mercedes-Benz AMG GT 4-door Coupé, Mercedes-Benz GT
026549020010SW048174Mercedes-Benz AMG GT

Bosch MG1CP002 original files

The Bosch MG1CP002 unit page