Original file

Mercedes-Benz A Bosch MG1CP002 0265490200 / 10SW054783

An original (stock) flash read of the Bosch MG1CP002 control unit, fitted in Mercedes-Benz A, hardware number 0265490200 and software number 10SW054783, 7,936.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz A2.0 petrol 421PS
Control unit
Bosch MG1CP002
File size
7,936.00 KB
Contents
Flash
Hardware number
0265490200
Software number
10SW054783
Software / calibration
1399021300

Technical data

Vehicle
BrandMercedes-Benz
Car modelA
Engine2.0 petrol 421PS
Power421.0PS / 309.6kW
Control unit
Control unitBosch MG1CP002
ECU makerBosch
Hardware number0265490200
Software number10SW054783
File
File typeOriginal flash read
File size7,936.00 KB (8,126,464 bytes)
File keye9f8882848746c7c
Identification read from the file
ECU nameMG1CP002
Bosch part / software10SW054783Offset in the file: 0x000164
Software / calibration1399021300Offset in the file: 0x3B99DF
Data set number1399032000Offset in the file: 0x682EB4
Boot software1399040700Offset in the file: 0x0186D5
Bosch project identifier (EPK)69/1/MG1CP002/289/AMG_MDG1G//MRG1x_19B_FRG_046_00_STAR23_xx_M139xx///Offset in the file: 0x3B99F0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MG1CP002 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0265490200 and software number 10SW054783. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Mercedes-Benz AMG 45Flash7,936.00 KB€20Add to cart

All reads of 0265490200 / 10SW054783

Other pairs of Bosch MG1CP002

HardwareSoftwareVehicles
026549020010SW044805Mercedes-Benz Benz C257 CLS53 AMG
026549020010SW047715Mercedes-Benz E / E Coupe, Mercedes-Benz AMG GT 4-door Coupé, Mercedes-Benz GT
026549020010SW048174Mercedes-Benz AMG GT
026549020010SW051357Mercedes-Benz GT 43, Mercedes-Benz GLE
026549020010SW056143Mercedes-Benz A45 AMG, Mercedes-Benz A45, Mercedes-Benz A
026549020010SW060743Mercedes-Benz E
02654902002569034600Mercedes-Benz CLS 450AMG
02654902002569038000Mercedes-Benz GT53

Bosch MG1CP002 original files

The Bosch MG1CP002 unit page