Original file

Mercedes-Benz E Bosch MG1CP002 0265490200 / 10SW060743

An original (stock) flash read of the Bosch MG1CP002 control unit, fitted in Mercedes-Benz E, hardware number 0265490200 and software number 10SW060743, 8,192.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz E3.0 petrol 435PS
Control unit
Bosch MG1CP002
File size
8,192.00 KB
Contents
Flash
Hardware number
0265490200
Software number
10SW060743
Software / calibration
2569022900

Technical data

Vehicle
BrandMercedes-Benz
Car modelE
Engine3.0 petrol 435PS
Power435PS / 319.9kW
Control unit
Control unitBosch MG1CP002
ECU makerBosch
Hardware number0265490200
Software number10SW060743
File
File typeOriginal flash read
File size8,192.00 KB (8,388,608 bytes)
File key276d8e9b10960c07
Identification read from the file
ECU nameMG1CP002
Bosch part / software10SW060743Offset in the file: 0x000144
Software / calibration2569022900Offset in the file: 0x39ED7F
Data set number2569039600Offset in the file: 0x6464B6
Boot software2569040600Offset in the file: 0x7D86D5
Bosch project identifier (EPK)69/1/MG1CP002/1/DA_MDG1G_SB//MRG1xx_19B_FRG_042_00_PT3xxx_x_M256xx///Offset in the file: 0x39ED90

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MG1CP002 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0265490200 and software number 10SW060743. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MG1CP002

HardwareSoftwareVehicles
026549020010SW048174Mercedes-Benz AMG GT
026549020010SW051357Mercedes-Benz GT 43, Mercedes-Benz GLE
026549020010SW054783Mercedes-Benz AMG 45, Mercedes-Benz A
026549020010SW056143Mercedes-Benz A45 AMG, Mercedes-Benz A45, Mercedes-Benz A
02654902002569034600Mercedes-Benz CLS 450AMG
02654902002569038000Mercedes-Benz GT53
044283026110SW044283Mercedes-Benz E53 AMG
062047026110SW062047Mercedes-Benz E450

Bosch MG1CP002 original files

The Bosch MG1CP002 unit page