Original file

Mercedes-Benz GT53 Bosch MG1CP002 0265490200 / 2569038000

An original (stock) flash read of the Bosch MG1CP002 control unit, fitted in Mercedes-Benz GT53, hardware number 0265490200 and software number 2569038000, 8,192.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz GT533.0
Control unit
Bosch MG1CP002
File size
8,192.00 KB
Contents
Flash
Hardware number
0265490200
Software number
2569038000
Bosch part / software
10SW048174
Software / calibration
2569022400

Technical data

Vehicle
BrandMercedes-Benz
Car modelGT53
Engine3.0
FuelPetrol
Control unit
Control unitBosch MG1CP002
ECU makerBosch
Hardware number0265490200
Software number2569038000
File
File typeOriginal flash read
File size8,192.00 KB (8,388,608 bytes)
File keyda0cf981fca5fa53
Identification read from the file
ECU nameMG1CP002
Bosch part / software10SW048174Offset in the file: 0x000144
Software / calibration2569022400Offset in the file: 0x385DE7
Data set number2569038000Offset in the file: 0x6456C2
Boot software2569040600Offset in the file: 0x7D86D5
Bosch project identifier (EPK)66/1/MG1CP002/1/DA_MDG1G//MRG1xx_18B_FRG_043_00_PT3xxx_x_M256xx///Offset in the file: 0x385DF8

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MG1CP002 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0265490200 and software number 2569038000. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MG1CP002

HardwareSoftwareVehicles
026549020010SW054783Mercedes-Benz AMG 45, Mercedes-Benz A
026549020010SW056143Mercedes-Benz A45 AMG, Mercedes-Benz A45, Mercedes-Benz A
026549020010SW060743Mercedes-Benz E
02654902002569034600Mercedes-Benz CLS 450AMG
044283026110SW044283Mercedes-Benz E53 AMG
062047026110SW062047Mercedes-Benz E450
06M907309D10SW041659Audi SQ5
13990317001399031700Mercedes-Benz A / A Berline

Bosch MG1CP002 original files

The Bosch MG1CP002 unit page