Original file
Mercedes-Benz A45 AMG Bosch MG1CP002 055929
An original (stock) flash read of the Bosch MG1CP002 control unit, fitted in Mercedes-Benz A45 AMG, software number 055929, 8,192.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Mercedes-Benz A45 AMG2.0 · 421.0PS / 308.9kW
- Control unit
- Bosch MG1CP002
- File size
- 8,192.00 KB
- Contents
- Flash
- Software number
- 055929
- Bosch part / software
- 10SW056143
- Software / calibration
- 1399020700
Technical data
| Brand | Mercedes-Benz |
|---|---|
| Car model | A45 AMG |
| Engine | 2.0 |
| Fuel | Petrol |
| Power | 421.0PS / 308.9kW |
| Control unit | Bosch MG1CP002 |
|---|---|
| ECU maker | Bosch |
| Software number | 055929 |
| File type | Original flash read |
|---|---|
| File size | 8,192.00 KB (8,388,608 bytes) |
| File key | 6d151767b55de969 |
| ECU name | MG1CP002 | |
|---|---|---|
| Bosch part / software | 10SW056143 | Offset in the file: 0x040144 |
| Software / calibration | 1399020700 | Offset in the file: 0x39EAE7 |
| Data set number | 1399030900 | Offset in the file: 0x6816F0 |
| Bosch project identifier (EPK) | 69/1/MG1CP002/289/AMG_MDG1G//MRG1x_18B_FRG_048_00_STAR23_xx_M139xx/// | Offset in the file: 0x39EAF8 |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch MG1CP002 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, software number 055929. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.