Original file
Mercedes-Benz CLS450 TUNINGCHIP Bosch MG1CP002 057059
An original (stock) flash read of the Bosch MG1CP002 control unit, fitted in Mercedes-Benz CLS450 TUNINGCHIP, software number 057059, 7,680.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Mercedes-Benz CLS450 TUNINGCHIP3.0 · 367PS / 269.9kW
- Control unit
- Bosch MG1CP002
- File size
- 7,680.00 KB
- Contents
- Flash
- Software number
- 057059
- Bosch part / software
- 10SW057059
Technical data
| Brand | Mercedes-Benz |
|---|---|
| Car model | CLS450 TUNINGCHIP |
| Engine | 3.0 |
| Fuel | Petrol |
| Power | 367PS / 269.9kW |
| Control unit | Bosch MG1CP002 |
|---|---|
| ECU maker | Bosch |
| Software number | 057059 |
| File type | Original flash read |
|---|---|
| File size | 7,680.00 KB (7,864,320 bytes) |
| File key | fd57e1a851f60f1b |
| ECU name | MG1CP002 | |
|---|---|---|
| Bosch part / software | 10SW057059 | Offset in the file: 0x600144 |
| Data set number | 2569039400 | Offset in the file: 0x6461E2 |
| Bosch project identifier (EPK) | 66/1/MG1CP002/1/DA_MDG1G//MRG1xx_19A_FRG_041_00_PT3xxx_x_M256xx/// | Offset in the file: 0x77FA7C |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch MG1CP002 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, software number 057059. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.