Original file

Mercedes-Benz E450 Bosch MG1CP002 0620470261 / 10SW062047

An original (stock) flash read of the Bosch MG1CP002 control unit, fitted in Mercedes-Benz E450, hardware number 0620470261 and software number 10SW062047, 7,680.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz E4503.0 · 367.0PS / 269.9kW
Control unit
Bosch MG1CP002
File size
7,680.00 KB
Contents
Flash
Hardware number
0620470261
Software number
10SW062047

Technical data

Vehicle
BrandMercedes-Benz
Car modelE450
Engine3.0
FuelPetrol
Power367.0PS / 269.9kW
Control unit
Control unitBosch MG1CP002
ECU makerBosch
Hardware number0620470261
Software number10SW062047
File
File typeOriginal flash read
File size7,680.00 KB (7,864,320 bytes)
File key7fb13c315446b4fc
Identification read from the file
ECU nameMG1CP002
Bosch part / software10SW062047Offset in the file: 0x600144
Data set number2569039500Offset in the file: 0x6464B6
Bosch project identifier (EPK)69/1/MG1CP002/1/DA_MDG1G_SB//MRG1xx_19B_FRG_042_00_PT3xxx_x_M256xx///Offset in the file: 0x77FA7C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MG1CP002 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0620470261 and software number 10SW062047. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MG1CP002

HardwareSoftwareVehicles
026549020010SW060743Mercedes-Benz E
02654902002569034600Mercedes-Benz CLS 450AMG
02654902002569038000Mercedes-Benz GT53
044283026110SW044283Mercedes-Benz E53 AMG
06M907309D10SW041659Audi SQ5
13990317001399031700Mercedes-Benz A / A Berline
25690230002569030101Mercedes-Benz GLE 53AMG
MRG1AMGR4-18B-SER_048_00-STAR23-055929Mercedes-Benz A45 AMG

Bosch MG1CP002 original files

The Bosch MG1CP002 unit page