Original file

Mercedes-Benz GLE Bosch MG1CP002 10SW037594

An original (stock) flash read of the Bosch MG1CP002 control unit, fitted in Mercedes-Benz GLE, software number 10SW037594, 8,192.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz GLEpetrol 367PS
Control unit
Bosch MG1CP002
File size
8,192.00 KB
Contents
Flash
Software number
10SW037594
Software / calibration
2569021700

Technical data

Vehicle
BrandMercedes-Benz
Car modelGLE
Enginepetrol 367PS
Power367PS / 269.9kW
Control unit
Control unitBosch MG1CP002
ECU makerBosch
Software number10SW037594
File
File typeOriginal flash read
File size8,192.00 KB (8,388,608 bytes)
File keyb784b4977470c135
Identification read from the file
ECU nameMG1CP002
Bosch part / software10SW037594Offset in the file: 0x040144
Software / calibration2569021700Offset in the file: 0x3B9CC7
Data set number2569035900Offset in the file: 0x680C5C
Bosch project identifier (EPK)66/1/MG1CP002/1/DA_MDG1G//MRG1x_18A_FRG_042_00_Star23_xx_M256xx///Offset in the file: 0x3B9CD8

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MG1CP002 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, software number 10SW037594. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MG1CP002

HardwareSoftwareVehicles
061205Mercedes-Benz GLE 53AMG
065786Mercedes-Benz E
10SW034465Mercedes-Benz CLS450 AMG
10SW034871Mercedes-Benz S
10SW044285Mercedes-Benz AMG__GT
10SW044805Mercedes-Benz CLS AMG
10SW047715Mercedes-Benz E
10SW048174Mercedes-Benz

Bosch MG1CP002 original files

The Bosch MG1CP002 unit page