Original file
Mercedes-Benz E Bosch MG1CP002 10SW047715
An original (stock) flash read of the Bosch MG1CP002 control unit, fitted in Mercedes-Benz E, software number 10SW047715, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Mercedes-Benz E457PS
- Control unit
- Bosch MG1CP002
- File size
- 2,048.00 KB
- Contents
- Flash
- Software number
- 10SW047715
Technical data
| Brand | Mercedes-Benz |
|---|---|
| Car model | E |
| Engine | 457PS |
| Fuel | Petrol |
| Displacement | 3.0 |
| Power | 457.0PS / 336.1kW |
| Control unit | Bosch MG1CP002 |
|---|---|
| ECU maker | Bosch |
| Software number | 10SW047715 |
| File type | Original flash read |
|---|---|
| File size | 2,048.00 KB (2,097,152 bytes) |
| File key | b429a16acc153412 |
| ECU name | MG1CP002 | |
|---|---|---|
| Bosch part / software | 10SW047715 | Offset in the file: 0x000144 |
| Data set number | 2569037400 | Offset in the file: 0x040C68 |
| Bosch project identifier (EPK) | 66/1/MG1CP002/1/DA_MDG1G//MRG1x_18A_FRG_043_00_Star23_xx_M256xx/// | Offset in the file: 0x17FA7C |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch MG1CP002 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, software number 10SW047715. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch MG1CP002
| Hardware | Software | Vehicles |
|---|---|---|
| 10SW034871 | Mercedes-Benz S | |
| 10SW037594 | Mercedes-Benz GLE | |
| 10SW044285 | Mercedes-Benz AMG__GT | |
| 10SW044805 | Mercedes-Benz CLS AMG | |
| 10SW048174 | Mercedes-Benz | |
| 10SW050075 | Mercedes-Benz E, Mercedes-Benz C43 AMG, Mercedes-Benz C | |
| 10SW051357 | Mercedes-Benz S350 | |
| 10SW052826 | Mercedes-Benz GLE450 |