Original file

Mercedes-Benz A45S AMG Bosch MG1CP002 MRG1AMGR4-18B-SER_051_00-STAR23- / 060919

An original (stock) flash read of the Bosch MG1CP002 control unit, fitted in Mercedes-Benz A45S AMG, hardware number MRG1AMGR4-18B-SER_051_00-STAR23- and software number 060919, 8,192.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz A45S AMG2.0 421PS
Control unit
Bosch MG1CP002
File size
8,192.00 KB
Contents
Flash
Hardware number
MRG1AMGR4-18B-SER_051_00-STAR23-
Software number
060919
Bosch part / software
10SW060919
Software / calibration
1399020800

Technical data

Vehicle
BrandMercedes-Benz
Car modelA45S AMG
Engine2.0 421PS
FuelPetrol
Control unit
Control unitBosch MG1CP002
ECU makerBosch
Hardware numberMRG1AMGR4-18B-SER_051_00-STAR23-
Software number060919
File
File typeOriginal flash read
File size8,192.00 KB (8,388,608 bytes)
File key160c3fc1f561d332
Identification read from the file
ECU nameMG1CP002
Bosch part / software10SW060919Offset in the file: 0x040144
Software / calibration1399020800Offset in the file: 0x39EB07
Data set number1399031600Offset in the file: 0x68170C
Bosch project identifier (EPK)69/1/MG1CP002/289/AMG_MDG1G//MRG1x_18B_FRG_051_00_STAR23_xx_M139xx///Offset in the file: 0x39EB18

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MG1CP002 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number MRG1AMGR4-18B-SER_051_00-STAR23- and software number 060919. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MG1CP002

HardwareSoftwareVehicles
25690230002569030101Mercedes-Benz GLE 53AMG
MRG1AMGR4-18B-SER_048_00-STAR23-055929Mercedes-Benz A45 AMG
MRG1AMGR4-18B-SER_048_00-STAR23-10SW055929Mercedes-Benz A BR PERFORMANCE
MRG1AMGR4-18B-SER_048_01-STAR23-070410Mercedes-Benz CLA 45AMG, Mercedes-Benz A45 AMG
MRG1AMGR4-19B-SER_046_00-STAR23-067718Mercedes-Benz CLA
MRG1AMGR4-19B-SER_046_00-STAR23-10SW067718Mercedes-Benz A45 AMG
MRG1AMGR4-19B-SER_046_00-STAR23-10SW080354Mercedes-Benz A45 AMG
MRG1x-17B-SER_046_00-Star23-xx-M256xx-DEH30-SExxx-EAbxx-Axxx10SW034398Mercedes-Benz E53

Bosch MG1CP002 original files

The Bosch MG1CP002 unit page