Original file
Mercedes-Benz E53 Bosch MG1CP002 MRG1x-17B-SER_046_00-Star23-xx-M256xx-DEH30-SExxx-EAbxx-Axxx / 10SW034398
An original (stock) flash read of the Bosch MG1CP002 control unit, fitted in Mercedes-Benz E53, hardware number MRG1x-17B-SER_046_00-Star23-xx-M256xx-DEH30-SExxx-EAbxx-Axxx and software number 10SW034398, 7,680.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Mercedes-Benz E53435HP
- Control unit
- Bosch MG1CP002
- File size
- 7,680.00 KB
- Contents
- Flash
- Hardware number
- MRG1x-17B-SER_046_00-Star23-xx-M256xx-DEH30-SExxx-EAbxx-Axxx
- Software number
- 10SW034398
Technical data
| Brand | Mercedes-Benz |
|---|---|
| Car model | E53 |
| Engine | 435HP |
| Fuel | Petrol |
| Displacement | 3.0 |
| Control unit | Bosch MG1CP002 |
|---|---|
| ECU maker | Bosch |
| Hardware number | MRG1x-17B-SER_046_00-Star23-xx-M256xx-DEH30-SExxx-EAbxx-Axxx |
| Software number | 10SW034398 |
| File type | Original flash read |
|---|---|
| File size | 7,680.00 KB (7,864,320 bytes) |
| File key | fbfb8cd9f761e41a |
| ECU name | MG1CP002 | |
|---|---|---|
| Bosch part / software | 10SW034398 | Offset in the file: 0x600144 |
| Data set number | 2569034700 | Offset in the file: 0x63EC9E |
| Bosch project identifier (EPK) | 66/1/MG1CP002/1/DA_MDG1G//MRG1x_17B_FRG_046_00_Star23_xx_M256xx/// | Offset in the file: 0x77FA7C |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch MG1CP002 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number MRG1x-17B-SER_046_00-Star23-xx-M256xx-DEH30-SExxx-EAbxx-Axxx and software number 10SW034398. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch MG1CP002
| Hardware | Software | Vehicles |
|---|---|---|
| MRG1AMGR4-18B-SER_051_00-STAR23- | 060919 | Mercedes-Benz A45S AMG |
| MRG1AMGR4-19B-SER_046_00-STAR23- | 067718 | Mercedes-Benz CLA |
| MRG1AMGR4-19B-SER_046_00-STAR23- | 10SW067718 | Mercedes-Benz A45 AMG |
| MRG1AMGR4-19B-SER_046_00-STAR23- | 10SW080354 | Mercedes-Benz A45 AMG |
| MRG1x-18A-SER_042_00-Star23-xx-M256xx-DEH30-SExxx-EAbxx-Axxx | 10SW044283 | Mercedes-Benz E |
| MRG1x-18A-SER_043_00-Star23-xx-M256xx-DEH30-SExxx-EAbxx-Axxx | 10SW047716 | Mercedes-Benz GT |
| MRG1x_17B_FRG_046_00_Star23_xx_M256xx | 034398 | Mercedes-Benz E53 AMG |
| MRG1x_17B_FRG_046_00_Star23_xx_M256xx | 10SW044814 | Mercedes-Benz S |