Original file

Mercedes-Benz E53 AMG Bosch MG1CP002 RBA4CA5F4933C9F13E4C / 050075

An original (stock) flash read of the Bosch MG1CP002 control unit, fitted in Mercedes-Benz E53 AMG, hardware number RBA4CA5F4933C9F13E4C and software number 050075, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Mercedes-Benz E53 AMG3.0 · 453.0PS / 333.2kW
Control unit
Bosch MG1CP002
File size
2,048.00 KB
Contents
Flash
Hardware number
RBA4CA5F4933C9F13E4C
Software number
050075
Bosch part / software
10SW050075

Technical data

Vehicle
BrandMercedes-Benz
Car modelE53 AMG
Engine3.0
FuelDiesel
Power453.0PS / 333.2kW
Control unit
Control unitBosch MG1CP002
ECU makerBosch
Hardware numberRBA4CA5F4933C9F13E4C
Software number050075
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keyad358217d3fdad78
Identification read from the file
ECU nameMG1CP002
Bosch part / software10SW050075Offset in the file: 0x000144
Data set number2569038000Offset in the file: 0x0456C2
Bosch project identifier (EPK)66/1/MG1CP002/1/DA_MDG1G//MRG1xx_18B_FRG_043_00_PT3xxx_x_M256xx///Offset in the file: 0x17FA7C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MG1CP002 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number RBA4CA5F4933C9F13E4C and software number 050075. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MG1CP002

Bosch MG1CP002 original files

The Bosch MG1CP002 unit page