Original file

Porsche 992 S Bosch MG1CP007 992906021AL / 992906021AL

An original (stock) flash read of the Bosch MG1CP007 control unit, fitted in Porsche 992 S, hardware number 992906021AL and software number 992906021AL, 8,192.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Porsche 992 S3.0 · 450.0PS / 331.0kW
Control unit
Bosch MG1CP007
File size
8,192.00 KB
Contents
Flash
Hardware number
992906021AL
Software number
992906021AL
Bosch part / software
10SW050675

Technical data

Vehicle
BrandPorsche
Car model992 S
Engine3.0
FuelPetrol
Power450.0PS / 331.0kW
Control unit
Control unitBosch MG1CP007
ECU makerBosch
Hardware number992906021AL
Software number992906021AL
File
File typeOriginal flash read
File size8,192.00 KB (8,388,608 bytes)
File key25e08375f3f65486
Identification read from the file
ECU nameMG1CP007
Bosch part / software10SW050675Offset in the file: 0x01C144
Bosch project identifier (EPK)44/1/MG1CP007/4///DMG1007P01C1681_MY20N50///Offset in the file: 0x080248

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MG1CP007 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 992906021AL and software number 992906021AL. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MG1CP007

HardwareSoftwareVehicles
992906020CC992907051Porsche 992.1 Carrera
992906020Q992906020QPorsche 911 Carrera
992906021AJ10SW050649Porsche 992 Carrera, Porsche 911 Carrera
992906021AJ992907051Porsche 911 Carrera 2
992906021AM10SW050652Porsche 911 Carrera
992906021AM992907051Porsche 911 Carrera 2, Porsche 911 Carrera
992906021AN057784Porsche 911 Carrera 3.0 DFI Turbo
992906021AN1037562408Porsche 911

Bosch MG1CP007 original files

The Bosch MG1CP007 unit page