Original file

Porsche 992 3.0T Bosch MG1CP007 992906022N / 072252

An original (stock) flash read of the Bosch MG1CP007 control unit, fitted in Porsche 992 3.0T, hardware number 992906022N and software number 072252, 6,144.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Porsche 992 3.0T3.0 petrol 480.0PS / 353.0kW
Control unit
Bosch MG1CP007
File size
6,144.00 KB
Contents
Flash
Hardware number
992906022N
Software number
072252
Bosch part / software
10SW072252

Technical data

Vehicle
BrandPorsche
Car model992 3.0T
Engine3.0 petrol 480.0PS / 353.0kW
Control unit
Control unitBosch MG1CP007
ECU makerBosch
Hardware number992906022N
Software number072252
File
File typeOriginal flash read
File size6,144.00 KB (6,291,456 bytes)
File keya16c6b2767ab0e65
Identification read from the file
ECU nameMG1CP007
Bosch part / software10SW072252Offset in the file: 0x080144
Bosch project identifier (EPK)44/1/MG1CP007/4///DMG1007P01C1681_MY20P51///Offset in the file: 0x080248

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MG1CP007 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 992906022N and software number 072252. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MG1CP007

HardwareSoftwareVehicles
992906021AN992907051Porsche 911 Carrera 2
992906021AP992907051Porsche
992906021BE992906021BEPorsche 911 Carrera 2
992906021BJ992907051Porsche 992.1 Carrera
992906022N10SW072252Porsche 911 Carrera GTS
992906026AA992907115Porsche 911 Turbo S
992906026M992906026MPorsche 911 Turbo S
992906026M992907115Porsche 911 Turbo S, Porsche 992 Turbo S

Bosch MG1CP007 original files

The Bosch MG1CP007 unit page