Original file
Porsche 911 Bosch MG1CP007 992906026R / 10SW077668
An original (stock) flash read of the Bosch MG1CP007 control unit, fitted in Porsche 911, hardware number 992906026R and software number 10SW077668, 8,192.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Porsche 9113.8 petrol 650PS
- Control unit
- Bosch MG1CP007
- File size
- 8,192.00 KB
- Contents
- Flash
- Hardware number
- 992906026R
- Software number
- 10SW077668
- Bosch part / software
- 10SW043617
Technical data
| Brand | Porsche |
|---|---|
| Car model | 911 |
| Engine | 3.8 petrol 650PS |
| Power | 650.0PS / 478.1kW |
| Control unit | Bosch MG1CP007 |
|---|---|
| ECU maker | Bosch |
| Hardware number | 992906026R |
| Software number | 10SW077668 |
| File type | Original flash read |
|---|---|
| File size | 8,192.00 KB (8,388,608 bytes) |
| File key | e89a08c78c30dce7 |
| ECU name | MG1CP007 | |
|---|---|---|
| Bosch part / software | 10SW043617 | Offset in the file: 0x000164 |
| Bosch project identifier (EPK) | 44/1/MG1CP007/4///DMG1007P01C1681_MY20P23/// | Offset in the file: 0x080248 |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch MG1CP007 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number 992906026R and software number 10SW077668. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch MG1CP007
| Hardware | Software | Vehicles |
|---|---|---|
| 992906026M | 992907115 | Porsche 911 Turbo S, Porsche 992 Turbo S |
| 992906026N | 992906026N | Porsche 992.1 Turbo S |
| 992906026P | 10SW057052 | Porsche 911 Turbo S |
| 992906026P | 10SW067621 | Porsche 911 Carrera Turbo |
| 992906026R | 992907115 | Porsche 911 Turbo S |
| 992906027M | 10SW067622 | Porsche 992 |
| 992906027M | 992906027M | Porsche 992 |
| 992906027M | 992907115 | Porsche 911 Turbo |