Original file

Porsche Cayenne 3.0T E-hybrid V6 Bosch MG1CS002 06M907309G / 050063

An original (stock) flash read of the Bosch MG1CS002 control unit, fitted in Porsche Cayenne 3.0T E-hybrid V6, hardware number 06M907309G and software number 050063, 6,144.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Porsche Cayenne 3.0T E-hybrid V63.0 petrol 462.0PS / 339.8kW
Control unit
Bosch MG1CS002
File size
6,144.00 KB
Contents
Flash
Hardware number
06M907309G
Software number
050063
Bosch part / software
10SW050063

Technical data

Vehicle
BrandPorsche
Car modelCayenne 3.0T E-hybrid V6
Engine3.0 petrol 462.0PS / 339.8kW
Control unit
Control unitBosch MG1CS002
ECU makerBosch
Hardware number06M907309G
Software number050063
File
File typeOriginal flash read
File size6,144.00 KB (6,291,456 bytes)
File keyff0da1fd3084e505
Identification read from the file
ECU nameMG1CS002
Bosch part / software10SW050063Offset in the file: 0x080144
Bosch project identifier (EPK)45/1/MDG1/5/P1492//DMG1002AH2C1492_MY19DC0///Offset in the file: 0x080248

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MG1CS002 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 06M907309G and software number 050063. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MG1CS002

HardwareSoftwareVehicles
06M907309G043876Porsche Cayenne 3.0T
06M907309G045242Audi A7 3.0 TFSI
06M907309G045957Audi Q8 3.0 TFSI
06M907309G049587Audi A7 3.0 TFSI
06M907309G051722Audi S5 3.0 TFSI
06M907309G056265Audi S4 S4
06M907309G058926Audi A8 3.0 TSI/TFSI
06M907309G06M907309GPorsche Cayenne, Porsche A8, Porsche Cayenne E-Hybrid

Bosch MG1CS002 original files

The Bosch MG1CS002 unit page