Original file

BMW 330E 2018y MG1CS003 Bosch MG1CS003 0261S21182 / 10SW032618

An original (stock) flash read of the Bosch MG1CS003 control unit, fitted in BMW 330E 2018y MG1CS003, hardware number 0261S21182 and software number 10SW032618, 7,936.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW 330E 2018y MG1CS003B48B20
Control unit
Bosch MG1CS003
File size
7,936.00 KB
Contents
Flash
Hardware number
0261S21182
Software number
10SW032618

Technical data

Vehicle
BrandBMW
Car model330E 2018y MG1CS003
EngineB48B20
FuelPetrol
Displacement2.0
Control unit
Control unitBosch MG1CS003
ECU makerBosch
Hardware number0261S21182
Software number10SW032618
File
File typeOriginal flash read
File size7,936.00 KB (8,126,464 bytes)
From the file nameBMW 330E hybrid 2018y MG1CS003
File key23755a7bb54061e1
Identification read from the file
ECU nameMG1CS003
Bosch part / software10SW032618Offset in the file: 0x000164
Bosch project identifier (EPK)53/1/MG1CS003/11/MG1CS003_Bx8_R1C2I562B//R1C2I562B///Offset in the file: 0x08D718

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MG1CS003 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0261S21182 and software number 10SW032618. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MG1CS003

Bosch MG1CS003 original files

The Bosch MG1CS003 unit page