Original file

BMW X3 X3-30i Bosch MG1CS003 R0C9J8D2BAGZX0 / R0C9J8D2B

An original (stock) flash read of the Bosch MG1CS003 control unit, fitted in BMW X3 X3-30i, hardware number R0C9J8D2BAGZX0 and software number R0C9J8D2B, 7,936.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW X3 X3-30ipetrol 252.0PS / 185.3kW
Control unit
Bosch MG1CS003
File size
7,936.00 KB
Contents
Flash
Hardware number
R0C9J8D2BAGZX0
Software number
R0C9J8D2B
Bosch part / software
10SW036550

Technical data

Vehicle
BrandBMW
Car modelX3 X3-30i
Enginepetrol 252.0PS / 185.3kW
Control unit
Control unitBosch MG1CS003
ECU makerBosch
Hardware numberR0C9J8D2BAGZX0
Software numberR0C9J8D2B
File
File typeOriginal flash read
File size7,936.00 KB (8,126,464 bytes)
File key6463c4bc4207e1f4
Identification read from the file
ECU nameMG1CS003
Bosch part / software10SW036550Offset in the file: 0x000164
Bosch project identifier (EPK)53/1/MG1CS003/11/MG1CS003_BX8_R0C2J8D2B//R0C2J8D2B///Offset in the file: 0x08E748

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MG1CS003 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number R0C9J8D2BAGZX0 and software number R0C9J8D2B. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MG1CS003

Bosch MG1CS003 original files

The Bosch MG1CS003 unit page