Original file

BMW 3er 330i Bosch MG1CS003 R1C2J8B2B / #EPST:R1C9J8B2B______#R1C9J8B2BAGGX4

An original (stock) flash read of the Bosch MG1CS003 control unit, fitted in BMW 3er 330i, hardware number R1C2J8B2B and software number #EPST:R1C9J8B2B______#R1C9J8B2BAGGX4, 8,192.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW 3er 330ipetrol 252.0PS / 185.3kW
Control unit
Bosch MG1CS003
File size
8,192.00 KB
Contents
Flash
Hardware number
R1C2J8B2B
Software number
#EPST:R1C9J8B2B______#R1C9J8B2BAGGX4

Technical data

Vehicle
BrandBMW
Car model3er 330i
Enginepetrol 252.0PS / 185.3kW
Control unit
Control unitBosch MG1CS003
ECU makerBosch
Hardware numberR1C2J8B2B
Software number#EPST:R1C9J8B2B______#R1C9J8B2BAGGX4
File
File typeOriginal flash read
File size8,192.00 KB (8,388,608 bytes)
File key2e144143ae7abcfc
Identification read from the file
ECU nameMG1CS003
Bosch project identifier (EPK)53/1/MG1CS003/11/MG1CS003_BX8_R1C2J8B2B//R1C2J8B2B///Offset in the file: 0x6C5AE8

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MG1CS003 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number R1C2J8B2B and software number #EPST:R1C9J8B2B______#R1C9J8B2BAGGX4. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MG1CS003

Bosch MG1CS003 original files

The Bosch MG1CS003 unit page