Original file

BMW 1 Serie - 5drs 140i Bosch MG1CS003 R1C9F359BCEKY2 / #EPST:R1C9F359B______#R1C9F359BCEKY2

An original (stock) flash read of the Bosch MG1CS003 control unit, fitted in BMW 1 Serie - 5drs 140i, hardware number R1C9F359BCEKY2 and software number #EPST:R1C9F359B______#R1C9F359BCEKY2, 16,384.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW 1 Serie - 5drs 140ipetrol 326.3PS / 240.0kW
Control unit
Bosch MG1CS003
File size
16,384.00 KB
Contents
Flash
Hardware number
R1C9F359BCEKY2
Software number
#EPST:R1C9F359B______#R1C9F359BCEKY2

Technical data

Vehicle
BrandBMW
Car model1 Serie - 5drs 140i
Enginepetrol 326.3PS / 240.0kW
Displacement3.0
Control unit
Control unitBosch MG1CS003
ECU makerBosch
Hardware numberR1C9F359BCEKY2
Software number#EPST:R1C9F359B______#R1C9F359BCEKY2
File
File typeOriginal flash read
File size16,384.00 KB (16,777,216 bytes)
File key947fd4a9886c5611
Identification read from the file
ECU nameMG1CS003
Bosch project identifier (EPK)53/1/MG1CS003/11/MG1CS003_BX8_R1C2F359B//R1C2F359B///Offset in the file: 0x6C2DDC

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch MG1CS003 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number R1C9F359BCEKY2 and software number #EPST:R1C9F359B______#R1C9F359BCEKY2. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch MG1CS003

Bosch MG1CS003 original files

The Bosch MG1CS003 unit page